Aerosol Disinfection Made Easy

 

New MobiWatch® MaxiBIO From Anachem: Ordering Information

 

Disinfection With A Difference  

Disinfecting the Air You Breathe - Disinfecting Surfaces You Contact - Disinfecting Places You Can’t Reach

BIO-DECONTAMINATION
MobiWatch® equipment used in conjunction with MicroSol3+® Sporicide is designed to effectively eliminate microorganisms whilst avoiding material compatibility issues. The dry mist automatically sprayed within the targeted area provides a sterile and residue-free environment with limited down-time. All surfaces whether accessible or out-of-reach from standard 'spray and wipe' protocols are disinfected as a result of the treatment with MobiWatch. It is used to disinfect all kinds of surfaces, including those which are generally inaccessible or hidden in a hospital/patient environment or in other ultra-sensitive environments.

 

  • 100% Saturation
  • Reduces Down Time
  • Low Cost
  • Labour Free
  • Decontaminated Area is Safe to Re-enter After Only 4 Hours
  • Efficient Deep Clean
  • Small Footprint

 

 

Operation principle
Aerial diffusion of a disinfecting compound pressurised by an oil-free compressor and propelled via a dry-mist generating nozzle (particles <10 microns): The disinfecting mist saturates the targeted volume and hence comprehensively treats accessible as well as out-of-reach room surfaces. With a fixed mist production flow-rate, the room volume treatment is a function of the equipment operation duration. The equipment is operated with a timer which allows personnel to safely leave the site before the initiation of the disinfecting procedure and a digital programmer to tune-up the appropriate treatment duration.  

 
 
Treated Volume and Operation Time
Anachem recommends that MobiWatch is exclusively used with MicroSol3+ Sporicide, for which it has been developed.
Based on the selected treatment density with the disinfecting compound, MobiWatch may treat up to 500m3 (if applied dosage is 4ml/m3). The optimal treatment volume for MobiWatch is however recommended not to exceed 500m3 (even at lower density spraying) to guarantee an optimized mist spread.

 

 
TECHNICAL FEATURES & SPECIFICATIONS
Operating principle : Compression-propelled dry-mist diffusion (oil-free air compressor)
Tuning : Adjustable flow by trimmer
Tank capacity : 2 litres
Maximum treatable volume : 500m3 (at 4ml/m3)
Consumption : >1800ml/hour
Max targeted volume : ( 4ml/m3) 500m3 (8ml/m3) 250m3
Noise level : <52db
A.C.: 230 volts
Frequency: 50/60 Hz
Consumption : 310 Watts
DIMENSIONS Length: 345 mm Width: 320 mm Height : 320 mm Weight : 12kg
 
MicroSol 3+ Sporicide

Ready to Use Sporicidal Surface Disinfectant
Key Features:
 

  • No odour or fumes, environmentally safe
  • Neutral pH
  • 18 months shelf-life
  • Extensive test data to EN standards against spores, bacteria, mycobacteria, fungi and viruses
  • New formulation based on hydrogen peroxide
  • Compatible with non-porous surfaces

 

Disinfectant Action Mode
  • Action on capsule
  • Action on cell wall
  • Action on cytoplasmatic membrane
  • Action on cytoplasm and energetic system


Key Active Ingredients:

  • H2O2
  • Surfactant
  • Chelator

 

Breakdown of Cell Membranes

 

                      
Influence of Surfactants on Wetting:

  • Ability to displace particles
  • Penetrate soil and surface irregularities
 

 

                                                    
For more information:
Call: +44 (0) 1582 747500, Fax: +44 (0) 1582 745105, Email: bioscience@anachem.co.uk

 


9 January 2009
Email to a colleague